Sena PS810 Bedienungsanleitung PDF herunterladen (Seite 32)

Figure 3-6 SMTP mode selection in SMTP configuration

3.5. IP Filtering

The Pro Series prevents unauthorized access using an IP address based filtering method. The users

can allow one of the following scenarios by changing the parameter settings:

- Any host cannot access a specific service of the Pro Series

- Only one host of a specific IP address can access a specific service of the Pro Series

- Hosts on a specific subnet can access a specific service of the Pro Series

- Any host can access a specific service of the Pro Series

The IP filtering feature is intended to control access to Telnet console, SSH console, NFS, Web server

or each port, which may be enabled or disabled. The factory default of the filtering feature is “All

services and ports are accessible from any host”.

The meanings of each parameter in IP filtering configuration are as follows,

 Interface

Apply IP filtering rule to the incoming packet of Pro Series. This is fixed parameter as eth0(Read-Only).

 Option and IP address/mask

Input field to describe a specific range of host on the network. The user may allow a host or a group of

hosts to access the Pro Series. The user must then enter the IP address and subnet of access. Any

user on a remote host must stay in the specified subnet boundary to access the Pro Series. To allow

only a specific host to access the Pro Series, enter the IP address of the specific host and just give

255.255.255.255 for the subnet with Normal option. To allow any hosts to have access to the Pro

Series, give 0.0.0.0 for both of the IP address and subnet with Normal option also. Refer to Table 3-2

for more details.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 109 110

Keine Kommentare

Sena PS810 Bedienungsanleitung Seite 32