Sena STS Series Betriebsanweisung PDF herunterladen (Seite 31)

The user may allow a host or a group of hosts to access the STS Series for configuration. The user

must then enter the IP address and subnet of access. Any user on a remote host must stay in the

specified subnet boundary to have the configuration access.

To allow only a specific host to have configuration access to the STS Series, enter the IP address of

the specific host and just give 255.255.255.255 for the subnet.

To allow any hosts to have access to the STS Series, give 0.0.0.0 for both of the IP address and

subnet. Refer to Table 3-2 for more details. The device’s default settings for remote hosts allowed for

configuration is “Any”.

Figure 3-7 IP filtering Configuration

Table 3-2 Input examples of allowed remote hosts

Input format

Allowable Hosts

Base Host IP address Subnet mask

Any host 0.0.0.0 0.0.0.0

192.168.1.120 192.168.1.120 255.255.255.255

192.168.1.1 ~ 192.168.1.254 192.168.1.0 255.255.255.0

192.168.0.1 ~ 192.168.255.254 192.168.0.0 255.255.0.0

192.168.1.1 ~ 192.168.1.126 192.168.1.0 255.255.255.128

192.168.1.129 ~ 192.168.1.254 192.168.1.128 255.255.255.128

Web access also uses the IP filtering function, which can be enabled or disabled. The factory default

setting is “Enabled”. When enabled, the user can specify a web host or hosts allowed to access the

STS Series for configuration.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 130 131

Keine Kommentare

Sena STS Series Betriebsanweisung Seite 31