Sena SPH10H-FM Betriebsanweisung PDF herunterladen (Seite 25)

English

SPH10H-FM

12. MOBILE PHONE CALL

MAKING AND ANSWERING

12.1 Mobile Phone Call Making and Answering

1. When you have an incoming call, simply tap the

Phone Button or the Jog Dial to answer the call.

2. You can also answer the incoming call by loudly

speaking any word of your choice if Voice Activated

Phone Answering is enabled.

3. To end a call, tap the Phone Button or press the Jog

Dial for 2 seconds until you hear a beep, or wait for

the called person to end the call.

4. To reject a call, press the Jog Dial for 2 seconds

until you hear a beep while the phone is ringing.

5. To transfer a call between the mobile phone and the

headset during the phone conversation, press the

Phone Button for 2 seconds until you hear a beep.

6. There are several ways to make a phone call:

- Enter numbers on your mobile phone keypad

and make a call. Then the call is automatically

transferred to the headset.

- For some older mobile phones which do not

automatically transfer calls to the headset, press

the Phone Button after entering phone numbers on

the mobile phone keypad.

- Tap the Phone Button in stand-by mode to activate

the voice dialing of your mobile phone. For this,

the voice dialing feature must be available on the

mobile phone. Refer to your mobile phone manual

for further instruction.

Note:

1. If you are using multipoint mobile phone connection and you have

an incoming call from the second phone during the call of the ﬁrst

phone, then you may still receive the call from second phone. In this

case, the call from the ﬁrst phone is on waiting mode. If you end a

call, then it will automatically guide you to the ﬁrst phone call.

2. If you are using multipoint connection of mobile phone and GPS,

you may not listen to the GPS voice instruction during the phone

call.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 61 62

Keine Kommentare

Sena SPH10H-FM Betriebsanweisung Seite 25